{"product_id":"thule-low-rider-821xtr","title":"Thule Low Rider XTR Fork Block Carrier (821XTR)","description":"\u003cp\u003eThe Thule Low-Rider 821XTR is a lockable fork-mount bike carrier that bolts to a flat surface: a ute tray or tub, a van floor, a trailer or a load platform. You remove the bike's front wheel and clamp the fork to the Low-Rider's 9mm quick-release skewer, which holds the bike upright, steady and low. It's made of heavy-duty metal and comes with a lock.\u003c\/p\u003e\n\n\u003ch2\u003eIs a fork-mount carrier right for my ute or van?\u003c\/h2\u003e\n\u003cp\u003eA fork mount holds the bike by its fork instead of the frame or wheels, so the bike can't lean, swing or rub against the next bike. It takes up little floor space, which lets you fit several bikes side by side in a ute tub or van. Because it's bolted down, it's ready to go every time you load up.\u003c\/p\u003e\n\u003cp\u003eIt suits riders who:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCarry bikes in a ute or van:\u003c\/strong\u003e bolt one Low-Rider per bike to the tray, tub or floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWant a secure, permanent setup:\u003c\/strong\u003e the bike stays put on rough roads and fire trails, and the lock deters casual theft.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHave a carbon frame:\u003c\/strong\u003e nothing clamps on the frame tubes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWill it fit my bike?\u003c\/h2\u003e\n\u003cp\u003eThe Low-Rider's skewer is a 9mm quick release, which fits forks with a 9 x 100mm quick-release axle. That's common on older mountain bikes, kids' bikes, hybrids and many road bikes.\u003c\/p\u003e\n\u003cp\u003eMost modern mountain bikes and many road and gravel bikes have a thru-axle fork instead. These need a Thule thru-axle adapter to suit your fork, sold separately. If you're not sure which axle your bike has, check the end of the front axle or the fork's spec.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe Low-Rider bolts through the surface it's mounted on. Mounting hardware isn't included. Use 1\/4\" or 6mm bolts or screws, with fender washers and locking nuts. Make sure the surface is solid enough to hold the bike securely, and leave room for the bike's rear wheel and handlebar.\u003c\/p\u003e\n\u003cp\u003eYou'll also need somewhere to carry the front wheel, such as a wheel holder or a spot in the ute or van where it won't roll around.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Thule Low-Rider 821XTR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount type:\u003c\/strong\u003e fork mount, bolts to a flat surface\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e 9mm quick release; thru-axle adapters sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock:\u003c\/strong\u003e included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e heavy-duty metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting hardware:\u003c\/strong\u003e not included (1\/4\" or 6mm bolts recommended)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the Thule Low-Rider fit thru-axle bikes?\u003c\/h3\u003e\n\u003cp\u003eYes, with a Thule thru-axle adapter for your fork size, sold separately. Without an adapter it fits 9mm quick-release forks only.\u003c\/p\u003e\n\u003ch3\u003eCan I use the Thule Low-Rider in a ute tub?\u003c\/h3\u003e\n\u003cp\u003eYes. It bolts to the floor of a ute tub or tray, a van floor, a trailer or any solid, flat surface.\u003c\/p\u003e\n\u003ch3\u003eCan I carry an e-bike on the Thule Low-Rider?\u003c\/h3\u003e\n\u003cp\u003eMany e-bikes fit, as long as you have the right adapter for the fork's axle. E-bikes are heavy, so make sure the mounting surface and bolts are strong enough.\u003c\/p\u003e\n\u003ch3\u003eIs the Thule Low-Rider good for carbon bikes?\u003c\/h3\u003e\n\u003cp\u003eYes. It holds the bike by the fork dropouts, so nothing clamps on the carbon frame.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with bolts?\u003c\/h3\u003e\n\u003cp\u003eNo. You'll need 1\/4\" or 6mm bolts or screws, fender washers and locking nuts to suit your mounting surface.\u003c\/p\u003e\n\u003ch3\u003eCan I lock my bike to it?\u003c\/h3\u003e\n\u003cp\u003eYes. The skewer is lockable, so the bike can't be removed without the key.\u003c\/p\u003e","brand":"THULE","offers":[{"title":"Default Title","offer_id":49656234803509,"sku":"091021784154","price":179.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/3468\/6261\/files\/zxnnajqcjtwqz0dsogah.png?v=1720591709","url":"https:\/\/ivanhoecycles.com.au\/products\/thule-low-rider-821xtr","provider":"Ivanhoe Cycles","version":"1.0","type":"link"}