Black Friday Prices, all November. Shop offers >

Full Face MTB Helmets

Full face MTB helmets add a chin bar to protect your jaw and face, the parts an open face trail helmet leaves exposed. They’re built for downhill, bike park and fast enduro riding, where a crash at speed is a real possibility.

View as

How do I choose a full face MTB helmet?

Start with how you get to the top of the trail.

If you pedal up between descents, you want a lighter, better ventilated enduro helmet. If you're shuttled, BMX racing or riding a chairlift, a heavier downhill helmet gives you more coverage where it counts. Most riders know which camp they're in, and that one decision narrows the range quickly.


Read more Read less

Lightweight enduro full face helmets

Enduro helmets keep the chin bar but cut weight and add large vents, so they don't feel like overkill on a long climb. The Fox Proframe range is the best-known example, and we stock it in adult and youth sizes. Compare it with the downhill-focused Rampage on our Fox full face MTB helmets page. For a lightweight full face MTB helmet at a lower price, the Abus AirDrop MIPS weighs 790g, and the Leatt Gravity 1.0 weighs 850g.

Full face MTB helmets with a removable chin guard

A removable chin guard gives you two helmets in one. Ride open face on the climb, then click the chin guard back on before a technical descent. The Leatt MTB Enduro 3.0 works this way, and for younger riders the Leatt Enduro 2.0 JR does too. A convertible helmet doesn't offer quite the same protection as a dedicated full face shell, but it's a sensible middle ground if you mostly ride trails with the occasional steeper, faster section.

Downhill MTB helmets

Downhill helmets use a thicker shell and more padding, and they cover more of the head. They're heavier and warmer, which doesn't matter much when you're not pedalling up. In this group we carry the Fox Rampage range, Bell full face helmets including the Sanction 2, the Leatt Gravity line, the Abus HiDrop, and helmets from Seven iDP and Kenny.

What's inside a full face helmet

Underneath the outer shell, a full face helmet uses EPS foam that crushes to absorb the energy of an impact. That foam only works once, so replace your helmet after any serious crash, even if the shell looks fine.

Shells are made in a few ways. ABS hard shells, like the Bell Sanction 2, are tough and keep the price down. In-mould polycarbonate saves weight. Fibreglass and carbon shells, like the Fox Rampage Comp and Rampage Pro Carbon, are lighter again at the top of the range.

Most helmets in this range are MIPS full face helmets. MIPS is a low-friction layer that lets the helmet move slightly on your head in an angled impact to reduce rotational force. Look for the yellow MIPS dot on the label.

Youth full face MTB helmets

Young riders hitting jumps and bike park trails need the same protection, in a smaller shell. Our youth range includes the Fox Youth Rampage and Youth Proframe, the Kali Zoka Youth, the Leatt Enduro 2.0 JR and the Abus Youdrop. Compare them all in our youth full face MTB helmets range.

Fit, goggles and care

A full face helmet should sit snugly without pressure points, and the chin bar shouldn't press on your jaw. The eyeport needs to be wide enough for your goggles to sit flat without pinching your nose or leaving gaps for dust. Many helmets also have a channel at the back of the shell to hold the goggle strap in place, so it's worth trying your full face MTB helmet with your goggles before you ride.

Cheek pads are removable on almost every model, which lets you fine-tune the fit and wash them. Sweat builds up fast in summer, so hand wash the liner and pads in cool water regularly and let them air dry. A tumble dryer can shrink the padding.

Ivanhoe Cycles has been a family-owned Melbourne bike shop since 1986, and every helmet we sell is fitted and sized at the time of purchase. To finish your setup, add MTB goggles, MTB gloves and knee and elbow guards from our MTB protection range.

Frequently Asked Questions

What's the best full face MTB helmet?

It depends on how you ride.

For pedalling up and riding down, a lightweight enduro helmet like the Fox Proframe. For shuttle and bike park days, a downhill helmet like the Fox Rampage or Bell Sanction 2.

If you want to ride open face on the climbs, a removable chin guard helmet like the Leatt MTB Enduro 3.0. For younger riders, the Fox Youth Proframe or Kali Zoka Youth.

What's a good affordable full face MTB helmet?

ABS shell helmets keep the price down without cutting out the chin bar. The Bell Sanction 2, Abus HiDrop, Seven iDP Project 23 and Kenny Elite are the most affordable adult options in our range, and the Kali Zoka Youth is the most affordable youth helmet.

What's the difference between an enduro and a downhill helmet?

Enduro helmets, like the Fox Proframe, are lighter and better ventilated for pedalling uphill. Downhill MTB helmets, like the Fox Rampage and Bell Sanction 2, use a thicker shell and more padding for maximum protection when you're shuttled or riding a chairlift to the top.

Can I use a full face MTB helmet for cross-country or casual trail riding?

You can, but it's heavier and warmer than you need. Most cross-country and casual riders are better off with an open face trail helmet, unless they ride rougher, faster terrain.

Are replacement cheek pads and visors available if parts wear out over time?

Yes, most brands we stock, including Fox, Bell, Leatt, Abus and Kali, offer replacement cheek pads and visors. Get in touch with our team and we can order in the right parts for your specific model.

Does a full face helmet get too hot in summer?

It runs warmer than an open face helmet. Enduro models like the Fox Proframe have large vents to manage heat, and a removable chin guard helmet lets you ride open face on the climbs.

How tightly should the chinbar fit against the jawline when properly buckled?

It should sit snugly without digging in or restricting your jaw movement when you talk or swallow. If you can easily slide more than a finger's width of space under the chinbar, it's likely too loose to do its job properly in a crash.

Are full face MTB helmets legal to wear on the road in Australia?

Yes. A full face bicycle helmet is road legal as long as it's certified to one of the six standards accepted in Australia:

AS/NZS 2063:2008, AS/NZS 2063:2020, EN 1078:2012+A1:2012, CPSC 16 CFR Part 1203, ASTM F1447-18 or Snell B-95.

Many full face helmets carry CPSC alongside ASTM F1952, the downhill standard. ASTM F1952 on its own isn't one of the six, so check the label inside the shell.

What is a convertible full face helmet?

A convertible helmet with a chin guard you can take off for climbs and refit before a descent, like the Leatt MTB Enduro 3.0. It's lighter and cooler on the climbs, but doesn't offer quite the same protection as a dedicated full face shell.

When should I replace a full face helmet?

After any serious crash, even if there's no visible damage. The EPS foam inside is designed to absorb one impact and won't protect you the same way twice.

Compare /4

Loading...