BuzzRack BuzzyBee 2T Car Rack (2 Bike)

If you don’t need a bike rack with a tilting function to access the trunk, then the BuzzRack Buzzybee platform rack is the best possible option on the market. The Buzzybee series offers convenient mounting, basic functions and compact storage. The rubber pad offers a good solution for carbon frames fitting as it does not apply pressure to the carbon tubes. 

Even though it is not assembled, BUZZYBEE 2 is very easy to put together. Assemble the wheel support frame to the base using 4 screws, assemble the light support with 2 more screws, install the license plate, slide in the plastic wheel supports, fit the rack to the tow ball with no tools needed and you are ready to go!

When you first place the BUZZYBEE 2 on the tow ball it supports itself – you can let go of it and it won’t fall to the ground. You’ll then take the weight again, spin the tightening knob until it’s tight, and lock it.

BUZZRACK‘s carriers comply with the very exacting standard XPR-18-904-4 and therefore include an anti-sway tensioner; this has an integrated handle and 2 or 3 turns are usually sufficient.

FEATURES

• Towball mounted
• Wheel holders will accommodate most wheelbases, even small children’s bikes. You can reverse the wheel supports for the really small bikes.
• The long wheel rubber-padded wheel straps hold tyres up to 3.25” wide; pull on them to tighten, and use the quick release to loosen
• Suitable for carbon frame bikes; the rubber bike frame pads and high resistance straps hold any type of tube firmly but gently.
• Maximum permitted load is 40kg, with no bike weighing more than 20kg
• The down tube size is limited to 75mm diameter (3″); whatever bikes you have, always load the heaviest bikes nearest to the car
• The patented conical fitting fits to all tow balls, even to the bolt-on tow balls we see occasionally that do not meet standards for neck length or ball diameter.
• The BUZZYBEE 2 sits high on the tow ball, well clear of speed bumps and other hazards such as steep ferry ramps.
• The build quality – tube bending, welding, rust proofing, painting, component quality, is exemplary. The whole carrier looks and feels like the class act it is. All tools you might need are provided.
• All parts are replaceable if e.g. someone forgets that a tow bar carrier is fitted and reverses into a wall – which happens!
• Not suitable for trailers, campers, or RVs

TOW BALL ATTACHMENT

The patented conic system fits onto all ISO 50mm diameter tow balls. Easy to use and secure. The system can be locked using the locking knob. The special Buzz wrench is included for the installation of the product on the tow ball.

BIKE FRAME SUPPORTS

The bike frame holders can be adjusted in position and have soft padded cradles and ratchet strap to secure bikes. They are quick and easy to use.

LOCKING CABLE

The integrated locking cable assures a secure transportation. Just take the cable out of the main frame to secure the bikes.

TILTING

With the easily accessible pedal, you can safely tilt down the carrier far enough for gate access even with bikes on. The system is secured by a safety knob.

SAFETY

The product is supplied with an additional safety strap and a padded foam that allow to secure the bike to the main frame without damaging it.

SIZE

The bike holder arms can be folded for storage, or when the vehicle is parked up.

LIGHTING SYSTEM 

The BUZZYBEE 2 comes with a 7 pin lighting system. 7 pin to 13 pin adapter is not included but can be purchased as an option. (3 function 7 pin flat plug for AUS/NZ)