Silca 3D Printed UDH Derailleur Hanger

SILCA 3D printed titanium derailleur hangers bring increased strength and stiffness to this overlooked component so critical to quick and precise shifting. Modern electronic derailleurs shift so fast, and with such force, that conventional hangers made from low grade aluminum plate will flex up to 4 degrees during a shift resulting in less precise and slower shifting. Using advanced 3D modeling with AI generated structural infill, SILCA 3DP Hangers are 2-7x stiffer than aluminum hangers while also being 2-6 grams lighter depending on model.

For Shimano Direct Mount compatibility the SILCA 3DP Direct Mount Hangers offer 8-12x higher stiffness with 4-10 gram weight savings by eliminating the use of the direct mount link from the assembly.

Direct mount hangers replace the b-link in your Shimano derailleurs.  The newest edition of XTR and XT group sets no longer come with a B-Link.

SILCA 3DP Titanium Hangers provide a significant increase in stiffness over conventional aluminum hangers. Each SILCA hanger is precision-verified to within 0.2 degrees of parallelism prior to shipment.

Do not use an alignment tool or HAG; unlike aluminum, titanium resists cold-bending, and forcing it risks prematurely snapping the internal fracture geometry that protects your frame.

If you measure an alignment issue upon installation, do not attempt to bend the hanger, as the root cause is likely a slightly out-of-tolerance frame, dirty dropout, or a bent derailleur cage.